The Reliability Laboratory provides laboratory services with advanced test equipment to support product life simulation, environmental room simulation for semiconductor devices and electronic products. Experienced engineers provide reliability tests, reports and product qualification services for customers.  Our services range from temperature-electrical characterisation, dynamic/static burn-in test, temperature cycling test and HAST test.

Reliability Stress Test Laboratory Service:

  • High Temperature Operating Life Test (HTOL)
  • Low Temperature Operating Life Test (LTOL)
  • Temperature and Humidity Test
  • Temperature and Humidity Bias Test (THB)
  • Reflow Soldering Simulation
  • Temperature Cycle Test (Air-to-Air)
  • Autoclave Test / Pressure Cooker Test
  • Highly Accelerated Stress Test (HAST), Bias or Unbiased
  • High Temperature Storage
  • Moisture Sensitivity Level
  • Moisture Pre-conditioning

 

Reliability Laboratory

Laboratory Services - Equipment List

 

High Temperature Oven

Espec PH-201

Espec PH-201

Test Application:

  • High Temperature Bake
  • High Temperature Storage Life


Temperature Range:
+20°C to +200°C

Internal Chamber Dimensions:
600(W)x600(H)x600(D) mm

High Temperature Oven

Espec PH-201M

Espec STPH-201M

Test Application:

  • High Temperature Operating Life

Temperature Range:
+20°C to +500°C

Internal Chamber Dimensions:
600(W)x600(H)x600(D) mm

Temperature and Humidity Chamber

Espec PL-1KP

Espec PL-1KP

Test Application:

  • Moisture Sensitivity Level
  • Moisture Pre-conditioning
  • Temperature and Humidity Test


Temperature Range:
-40°C to +100°C

Humidity Range:
20%RH to 98%RH

Internal Chamber Dimensions:
500(W)x600(H)x400(D) mm

 

Temperature, Humidity and Pressure Chamber

Espec EHS-411MD

Espec EHS-411MD

Test Application:

  • Autoclave/HAST (Bias or Unbiased)


Temperature Range:
+105°C to 162.2°C

Humidity Range:
75%RH to 100%RH

Pressure Range:
2.9 to 56.8 PSI (gauge)

Internal Chamber Dimensions:
255(W)x255(H)x318(D) mm

 

Temperature, Humidity and Pressure Chamber

Espec EHS-221MD

Espec EHS-221MD

Test Application:

  • HAST (Bias or Unbiased) / Autoclave


Temperature Range:
+105°C to 142.9°C

Humidity Range:
75%RH to 100%RH

Pressure Range:
2.9 to 28.4 PSI (gauge)

Internal Chamber Dimensions:
355(W)x355(H)x426(D) mm

Thermal Shock Chamber

Espec TSE-11A

Espec TSE-11A

Test Application:

  • Temperature Cycle / Thermal Shock (Air to Air)

Temperature Range:
Low: -65°C to 0°C
High: +60°C to +200°C

Internal Chamber Dimensions:
320(W)x148(H)x230(D) mm

Maximum Load Capacity:
3 kg

Recovery Time:
Within 5 minutes with 2kg IC from -65°C to +150°C / +150°C to -65°C

Solder Reflow System

Heller 1809EXLN

Heller 1809EXLN

Test Application:

  • SMD Soldering Simulation


Temperature Range:
+25°C to +350°C
(Sn/Pb & Pb Free Capable)

Heated Tunnel Length:
254cm

Number of Heating Zone:
9 Top and 9 Bottom

Number of Cooling Zone:
2 Top and 2 Bottom

Reflow Atmosphere:
Air / Nitrogen Ready

Intermittent Operating Life (IOL) Test System (with K-Factor Calibrator)

GaoKun Electronics GK-PCx16+K-Factor

GaoKun Electronics 
GK-PCx16+K-Factor

Test Application:

  • Device Cyclic Thermal Stress
  • Degradation of Thermal Resistance

(Wire Bonded Interface)

Temperature Range:
+25°C to +150°C Ageing Test (+200°C Max.)

Device Type Applicable:
Low/High Power MOSFET and IGBT

Internal Chamber Dimensions:

1620(W) x 1320(H) x 1820(D) mm

Test Capacity:

12 Modules x 40 DUTs

Test Current IM:

10mA, Accuracy +/-0.1mA

Test Pulse Width:
400usec

Device Power Supply:
12 x (24Vdc, 60A)

 

Fast Rate Temperature
Humidity Chamber

Votsch VCS 7048-15

Votsch VCS 7048-15

Test Application:

  • PCB Board Level


Temperature Range:
-70°C to + 180°C

Temperature Ramp-Up Rate:
17°C/minute

Temperature Ramp-Down Rate:
15°C/minute

Humidity Range:
10% RH to 95% RH

Internal Dimension:
800 (W) x 920(H) x 650 (D) mm

Bench Top Temperature and Humidity Chamber

Espec SH-661

Espec SH-661

Test Application:

  • Moisture Sensitivity Level
  • Moisture Pre-conditioning
  • Temperature and Humidity Test


Temperature Range:
-60°C to +150°C

Humidity Range:
30%RH to 95%RH

Internal Chamber Dimensions:
400(W)x400(H)x400(D) mm


Enquiry
+852 2629 6600 / +852 2629 6683
arrow up arrow down arrow left arrow right icon close icon text icon help icon hkstp