• We provide a series of services for IC Test Development and Pilot Production:
    • Test programme development for digital, mixed-signal, RF and memory products
    • Loadboard design
    • Probe card design
    • Characterisation programme development
    • Tester platform conversion
    • Production yield analysis and yield improvement
    • Test time reduction
       
  • We have the equipment to support probing of full wafer as well as manual probing of MPW wafer.
  • We can help to do full measurement according to device specifications. This can be done on ATE or in the lab.
  • Characterisation is the process of understanding how your devices will behave in extreme or non-standard conditions. This can either be design related or wafer fabrication process induced. We can help to define and execute on device parameters characterisation depending on customers' needs.
Equipment List

Class: Mixed Signal Tester

ATE Vendor & Model: Verigy V93000 PS800

Application: Verigy V93000 PS800 test system has the ability to test the most complex, high pin count and high performance SoC devices.

Class: Mixed Signal Tester

ATE Vendor & Model: Verigy V93000 PS400

Application:Verigy V93000 PS400 test system is an entry-level cost-of-test solution for low-end digital and mixed-signal consumer products.

Class: Mixed Signal Tester

ATE Vendor & Model:Credence ASL 1000

Application: The ASL1000, the original member of the ASL family, with greater than 1000 systems installed, supports up to 19 instruments in a fully configured system.

Class:  Digital Tester

ATE Vendor & Model: Teradne J750

Application: Teradyne J750 provides a digital test platform with 100MHz 512 digital channels.

 

 

Class: Pick & Place Test Hander

ATE Vendor & Model: Delta EDGE

Application: The Delta EDGE is an x1 to x4 site pick-and-place handler for tray-based packages. Its standard package size range is 3mm x 3mm up to 40mm x 40mm and includes BGA, QFP, TQFP, TSOP and QFN..

Class: Pick & Place Test Hander

ATE Vendor & Model: Hontech HT-7045

Application: High UPH Epson compatible pick-and-place handler.

Class: Wafer Prober

ATE Vendor & Model: TSK UF200A, UF3000

Application:  These wafer probers can handle wafer sizes of 5, 6, 8 and 12 inches, and are auto-sizing.

Class: ThermoStream

ATE Vendor & Model: Temptronic TPO4310A

Application: TPO4310A is a Thermal Inducing Systems that quickly and conveniently bring small and large devices, modules, PCBs, and other assemblies to precise temperature at the tester or application site. Temperature range is -75°C to +225°C.

 

 

Class: Lead Scanner

ATE Vendor & Model: ICOS CI-T120

Application: The latest innovations in vision technology, high speed and superior vision accuracy in component handling.

arrow up arrow down arrow left arrow right icon close icon text icon help icon hkstp